Fanotec Multi-cam Trigger - F9987

Nodal Ninja Multi-cam Trigger safely splits a dual-channel input signal into four dual-channel outputs, splitting control input to multiple cameras. The on board double action switch allows you to use it as a standalone trigger or test camera array quickly.

Specifications

• All 4 output ports are diode isolated, one camera will not affect another.
• Compatible with cameras that use separate input pins for focus and shutter controls, eg Contax, Canon, Olympus, Hasselblad, Pentax, Nikon, Sigma and Sony.
• Velcro strap for easy mounting to different devices.
• 2 input ports can be daisy-chained to allow tens or hundreds of cameras to be triggered at the same time.
• All ports are equipped with ESD diodes to protect your cameras and controlling device from ESD damages.
• All ports utilize a 3-pole 2.5mm female jack. A remote shutter release cable is required for each camera. An input cable with a 2.5mm plug is also needed, use F9980-1 for MECHA.
• Cables sold separately.

NOT compatible with Fuji film, Leica, Panasonic, Ricoh or other camera that uses one input pin for focus and shutter release.